PROJECT GALLERY
Built from scratch. Built on a budget. Built to work.
🔨 CURRENTLY BUILDING
Watch these projects come to life. Follow @kgthetech on TikTok for progress updates.
Custom ABS plastic lid for the cyberdeck housing. Handcrafted because Kenneth can't afford a 3D printer. Requires precise measurements and shaping.
Experimenting with 5GHz antenna designs for modern Wi-Fi 6 networks. Testing different materials and configurations for optimal performance.
Improved version of the ESP32 signal survey kit with better GPS accuracy, enhanced logging features, and OLED display for real-time data.
COMPLETED PROJECTS
Cyberdeck (Portable Hacking Station)
Status: Completed
Year: 2024
Components: Car head unit stereo housing, Raspberry Pi 4 + Pi 5, NVMe HAT, Kali Linux, SDR-RTL, wireless adapter with monitor mode + injection, DIY Wi-Fi Pineapple integration, dual-button power system.
Purpose: Portable penetration testing station for authorized security testing and research.
Notable Features: Custom housing built from car stereo parts, dual Raspberry Pi setup for redundancy, integrated SDR for RF analysis.
Heavy-Duty CANTenna (Car Exhaust Pipe)
Status: In Production
Year: 2024
Specs: 2.4 GHz, 14dBi gain, 22-degree beam, up to 300 meters range. Built with thick car exhaust pipe tubing for maximum durability.
Purpose: Professional-grade Wi-Fi range extension for authorized penetration testing.
Notable Features: Tank-built construction, weatherproof, accurate 1/4 wavelength tuning, tripod included.
Standard CANTenna (Soup Can)
Status: In Production
Year: 2009-Present
Specs: 2.4 GHz, 14dBi gain, 22-degree beam, up to 300 meters range. Original design from 2009, refined over 15+ years.
Purpose: Budget-friendly Wi-Fi range extension for pentesters and hobbyists.
Notable Features: Proven design, professionally finished, accurately built to 1/4 wavelength specifications.
ESP32 Wi-Fi Signal Survey Kit
Status: In Production
Year: 2024
Components: ESP32 board, GPS antenna, 2x Wi-Fi antennas, MicroSD socket, demonstration firmware, quickstart guide.
Purpose: Educational development kit for RF/IoT hobbyists, signal strength experiments, and authorized network testing.
Notable Features: Open-hardware design, minimal demo firmware, expandable for custom projects.
FPV Racing Drone
Status: Complete (Awaiting Goggles)
Year: 2024
Components: Custom frame, brushless motors, flight controller, FPV camera, battery management system.
Purpose: FPV racing and aerial photography.
Story: Fully assembled and ready to fly, but Kenneth can't afford the FPV goggles yet. This project represents both his skill and his struggle.
DIY Wi-Fi Pineapple (Raspberry Pi)
Status: Completed
Year: 2024
Components: Raspberry Pi, wireless adapter with monitor mode, custom scripts, Kali Linux.
Purpose: Authorized wireless security auditing and penetration testing tool for networks you own or have permission to test.
Notable Features: Budget alternative to commercial Wi-Fi Pineapple, integrated into the cyberdeck.
SDR-RTL Radio Analysis Setup
Status: Completed
Year: 2024
Components: SDR-RTL dongle, antennas, GNU Radio, signal analysis software.
Purpose: RF signal analysis, spectrum monitoring, radio frequency research.
Notable Features: Integrated into cyberdeck for portable RF analysis.
Raspberry Pi NVMe HAT Configuration
Status: Completed
Year: 2024
Components: Raspberry Pi 5, NVMe HAT, high-speed SSD.
Purpose: Fast storage for cyberdeck, improves Kali Linux performance and data logging speed.
Notable Features: Significantly faster than SD card storage, improves overall system responsiveness.
SKILLS DEMONSTRATED
🔧 Hardware Engineering
- • RF antenna design & tuning
- • Circuit assembly & soldering
- • Custom enclosure fabrication
- • Component sourcing on a budget
💻 Software Development
- • ESP32/Arduino programming
- • Linux system administration
- • Python scripting
- • Firmware customization
🔐 Cybersecurity
- • Wireless security testing
- • RF signal analysis
- • Penetration testing tools
- • Ethical hacking practices
🎨 Design & Fabrication
- • Product photography
- • Custom enclosure design
- • Professional finishing
- • ABS plastic fabrication
WANT SOMETHING CUSTOM?
Kenneth takes on select custom projects. If you need a specific tool built, reach out with your requirements.
Custom builds may take 4-8 weeks depending on complexity and parts availability.
Request Custom Build →